1
Select a Location
Place your amplifier close to your input source (external
antenna); place the power injector close to your receiver
(TV) and an AC outlet. You can mount the amplifier on a
wall or another surface using the two supplied screws.
• To keep exposed cable to a minimum, you can place
the amplifier in your attic.
• Do not place the amplifier outdoors.
• To prevent interference, do not place the amplifier
within six inches of any other electronic device.
2
Route Cables
Route a 75-ohm (RG-6 or RG-6QS) coaxial cable (not
supplied) from the amplifier to your input source and
between amplifier and power injector. Follow these hints
when routing cable:
• Use only as much cable as is necessary to reach from
the amplifier to the input source and receiver.
• Do not route cables where they might be cut,
crimped, or crushed by normal activities.
5