Figure 193. Screw installation
9. Connect the front video cable to the system board.
Front video cable
Figure 194. Cable connection
10. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page 179).
11. Replace the top cover (see "Replacing the top cover" on page 151).
12. Slide the server into the rack.
13. Reconnect the power cords and any cables that you removed.
14. Turn on the peripheral devices and the server.
Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply.
When you remove or install a hot-swap power supply, observe the following precautions.
Screws
.
Chapter 5
Installing, removing, and replacing components
235