NEC univerge sv8100 User Manual page 88

Issue 7.00
Service Conditions
Related Features
Speed Dial - System/Group/Station
Caller ID - Flexible Ringing
Mobile Extension
2 - 80
The VM8000 InMail – Automatic Access to VM by Caller ID (CID) feature
requires Version 5.0 or higher software and the Version 5.0 Enhancement
license.
To use this feature, the voice mail box number must be set in Program 13-04-11.
If not set, the system requires the normal log in procedure or entering a valid
mailbox number and security code to login.
This feature is only supported for external calls to the InMail.
Mobile Extension users can use this feature by setting the VM box number in
Program 13-04-11 which corresponds to the Speed Dial number registered in
Program 15-22-01.
Common Speed Dial area is used for this feature. Group or Station Speed Dial
areas are not supported with this feature.
When a number in the Common Speed Dial includes a trunk access code or end
code ( ), the Redial name indication will work if the number matches completely.
#
If the same number is registered in the Common Speed Dial bin, the latest
Speed Dial number is used.
The Flexible ringing feature has priority over the VM8000 InMail – Automatic
Access to VM by Caller ID feature.
To enable this feature, Program 14-01-22 (Caller ID to Voice Mail) must be set to
1.
Refer to Features and Specifications manual for further information
Refer to Features and Specifications manual for further information
Refer to Features and Specifications manual for further information
Features