NEC univerge sv8100 User Manual page 472

Issue 7.00
47-18: SMTP Setup for Email Notification
Options
• Email Notification requires software version 03.10 or higher and a
Description
Options
3 - 464
Use this option to set up the SMTP server and email account options for
Email Notification.
47-18-01: Enable SMTP
Use this option to enable or disable SMTP email delivery. Once enabled,
you must make entries for the following SMTP options in order for Email
Notification to function.
Options
(Disabled)
0
(Enabled)
1
Default
(Disabled)
0
47-18-02: SMTP Server Name
Use this option to specify the SMTP server that will handle Email
Notification email delivery for the installation site. The SMTP server name is
typically similar to smtp.emailserver.com. If you didn't make an entry in the
90-11-11 and 90-11-12 Domain Name options, this entry must be the IP
address of the SMTP server since there is no way to resolve a name. There
is one entry per system.
Options
characters maximum.
48
Default
No entry.
47-18-03: SMTP Port Number
Use this option to specify the port (logical connection) the installation site's
email server uses for SMTP. Normally, this is port 25 (which is preassigned
by the IANA as the "Well-Known TCP Port Number" for SMTP).
Options
using 0-9, 4 max.
Digits
Memory Expansion Daughter Board .
Programming