NEC univerge sv8100 User Manual page 308

Issue 7.00
1~32 (valid
Call Routing
Related Features
Call Forward to a Mailbox
Record and Send a Message
Programming
Programming Subscriber Mailboxes
1.
2.
2 - 300
Routed Announcement Mailbox Routing (Continued)
(If outside caller routes to Announcement Mailbox from Call Routing Mailbox)
47-09-01
47-09-02
Next Call
Repeat
Routing
Count
Mailbox
x (x number of
repeats)
Mailbox)
The Next Call Routing Mailbox dial options also apply to a subscriber's Direct Inward Line
while it is forwarded to their mailbox.
Turn to this feature for an explanation of the options a caller can dial while recording.
Assign the Next Call Routing Mailbox to a Subscriber Mailbox (if required).
47-02-14 Next Call Routing Mailbox (Next CR Mbox)
Specify the Routing Mailbox (1~32) that should provide the caller leaving a
message with additional dialing options.
By default, this option is 1 (Call Routing Mailbox 1).
.
Optionally allow the caller to dial additional digits (not just 0) once in the Next
Call Routing Mailbox.
47-02-13 Dialing Option (Dialing Option)
Enter 1 to enable additional dialing options.
By default, this option is disabled (0).
.
47-09-03
Hang Up
After
If caller doesn't dial, they hear the
announcement x number of times and
0 = None
then route to the Next Call Routing
1 = Goodbye
Mailbox.
If the caller dials a digit during the
2 = Silent
announcement, they route to the Next
Call Routing Mailbox.
If caller doesn't dial, they hear the
announcement x number of times and
0 = None
then InMail hangs up.
1 = Goodbye
If the caller dials a digit during the
2 = Silent
announcement, they route to the Next
Call Routing Mailbox.
Action
Features