Optional Inmail Start-Up Programming; Set Up Automated Attendant To Answer Outside Calls - NEC univerge sv8100 User Manual

2.2
2.3
InMail System Guide
Subscriber Mailbox numbers 200~263).
Be aware that mailboxes beginning with a leading digit of either 0, * and #
.
are not supported.
Options
1~256
Default
Not Assigned
7. Also, the following program must be configured in a default system.
15-03-01 Single Line Telephone Basic Data Setup - Signalling Type
Set at DP (Dial Pulse) for InMail extensions.
15-03-03 Single Line Telephone Basic Data Setup – Terminal Type
Set at 1 (Special) for InMail extensions.

Optional InMail Start-Up Programming

Program Voice Mail keys on system extensions.
15-07-01 Programming Function Keys
Voice Mail keys are code 77.
Normally, the additional data is the number of the extension you are
programming.
You can optionally set up an extension Message key for Voice Mail
access in the next step.
Keysets can also have Voice Mail keys for Virtual Extensions, a
co-worker, or an uninstalled extension (for Message Center
operation).
Extension users can use Service Code 751 to set up their own Voice
Mail keys.
By default, no Voice Mail keys are assigned.
.

Set up Automated Attendant to Answer Outside Calls

To have Automated Attendant answer outside calls, perform the following:
Set up Direct Inward Lines (DILs) or DDI's
Terminate DILs or DDIs to InMail
After the DILs/DDIs to InMail are set up, all calls are answered by Call
Routing Mailbox 1 and Dial Action Table 1.
Answer Table 1 Runs Monday-Friday from 8:30AM to 5:00PM, and uses
Call Routing Mailbox 1.
At all other times, the Default Mailbox answers – also using Call Routing
Mailbox 1.
Issue 7.00
3 - 373