Zerowire Keypad - Interlogix zerowire ZW-6400 User Manual

ZeroWire Keypad

ALARM
RED
System is in alarm.
Enter your PIN code
then ENTER to turn
off the alarm. Press
the STATUS key for
more info.
Hold down the key to send a
FIRE
message to a central monitoring
center. Enter your PIN code then
ENTER to turn off a SOS alarm.
Features may be enabled by
professional security provider.
MEDICAL
POLICE
C
... 8
...
STAY
YELLOW
System is Armed
in
Stay Mode.
NOT LIT
System is disarmed if Non-urgent system
Away is also not lit. conditions present.
Press the STAY key Press the STATUS key
to arm in Stay mode. for system conditions.
conditions present.
Press the STATUS
If you are unable to
fix the issue, contact
your service provider
for help.
ZeroWire User Guide
STATUS
GREEN
System is normal. System is Armed
YELLOW
System is disarmed if
Stay is also not lit.
Press the AWAY key
to arm in Away mode.
RED
Urgent system
key for system
conditions.
Press the BYPASS key if you wish
to isolate (ignore) a sensor.
Bypassed sensors will not be
active when the system is armed
in Stay or Away modes.
Press the CHIME key to select
which sensors will make a
doorbell sound on the ZeroWire
when they are tripped.
Press the HISTORY key to listen
for alarm and event history.
AWAY READY
RED GREEN (STEADY)
All sensors are ready
in and the system can
Away Mode. be armed in Away or
Stay mode
NOT LIT GREEN (FLASHING)
Some sensors are
unsealed but system
is force-armable.
If these sensors are
not sealed by the end
of the exit time the
system may go into
alarm.
System cannot be
Press the STATUS key
for more info.
BYPASS
HISTORY
NOT LIT
armed.
CHIME
I
.. ...
... ..