Bypass A Sensor - Interlogix zerowire ZW-6400 User Manual

2.13 Bypass a Sensor

The sensor bypass menu is used to bypass selected sensors in your
security system. A bypassed sensor is ignored by the system and is not
capable of activating an alarm. This option is commonly used to
temporarily ignore sensors that require service, or sensors that you wish
to temporarily add to your "stay mode".
While still offering security with the remaining sensors, bypassing
sensors lowers your level of security. All bypassed sensors are reset and
cleared from memory when your security system is next armed / disarmed.
Your security system must be disarmed (turned off) before being able to
bypass sensors.
Bypass the (example) Side Door sensor using UltraSync.
Log in to your UltraSync site and press Sensors.
1.
2.
3.
C
... 25
...
Side Door sensor is Ready.
Press the Bypass button.
Confirm Side Door sensor is
bypassed.
ZeroWire User Guide
I
.. ...
... ..