The Blind Spot Monitor - Lexus GS450h2016 Service Manual

260
4-5. Using the driving support systems
WARNING
Handling the radar sensor
■
One Blind Spot Monitor sensor is installed
inside the left and right side of the vehicle rear
bumper respectively. Observe the following to
ensure the Blind Spot Monitor can function
correctly.
Keep the sensor and its surrounding area on the bumper clean at all times.
●
Do not subject the sensor or surrounding area on the bumper to a strong impact. If
●
the sensor moves even slightly off position, the system may malfunction and vehicles
that enter the detection area may not be detected. If the sensor or surrounding area is
subject to a strong impact, always have the area inspected by your Lexus dealer.
Do not disassemble the sensor.
●
Do not attach accessories or stickers to the sensor or surrounding area on the
●
bumper.
Do not modify the sensor or surrounding area on the bumper.
●
Do not paint the sensor or surrounding area on the bumper.
●
GS450h_OM_OM30E99U_(U)