Table of Contents
Advertisement
124
3-2. Opening, closing and locking the doors and trunk
Switching the door unlock function
■
It is possible to set which doors the entry function unlocks using the wireless remote con-
trol.
Turn the power switch off.
1
When the indicator light on the key surface is not on, press and hold
2
for approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step
.)
2
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed. (If
a door is not opened within 60 seconds after
again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 77)
Impact detection door lock release system
■
In the event that the vehicle is subject to a strong impact, all the doors are unlocked.
Depending on the force of the impact or the type of accident, however, the system may
not operate.
Using the mechanical key
■
The doors can also be locked and unlocked with the mechanical key. (P. 451)
Conditions affecting the operation of the smart access system with push-button start
■
or wireless remote control
P. 135
Customization
■
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 491)
GS450h_OM_OM30E99U_(U)
Unlocking function
Holding the driver' s door handle
unlocks only the driver' s door.
Holding a passenger' s door han-
dle unlocks all the doors.
Holding a door handle unlocks
all the doors.
is pressed, the doors will be locked
,
or
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
Advertisement
Table of Contents
