194
4-2. Driving procedures
Parking brake operation
■
When the power switch is not in ON mode, the parking brake cannot be released using
●
the parking brake switch.
When the power switch is not in ON mode, automatic mode (automatic brake setting
●
and releasing) is not available.
If the parking brake is operated repeatedly over a short period of time, the system may
●
restrict operation to prevent overheating. If this happens, refrain from operating the
parking brake. Normal operation will return after about 1 minute.
In situations such as when parking on a steep slope
●
force can be used by pressing the parking brake switch with the parking brake already
set.
*
: Use wheel chocks when parking on a steep slope.
Parking brake operation sound
■
When the parking brake operates, a motor sound (whirring sound) may be heard. This
does not indicate a malfunction.
Parking brake indicator light
■
Depending on the power switch mode, the parking brake indicator light will come on
●
and stay on as described below:
ON mode: Comes on until the parking brake is released.
Not in ON mode: Stays on for approximately 15 seconds.
When the power switch is turned off with the parking brake set, the parking brake indi-
●
cator light will stay on for about 15 seconds. This does not indicate a malfunction.
When there is a malfunction in the system
■
Warning lights and/or warning message will turn on or flash. (P. 402, 406)
Depending on the condition, the parking brake indicator light may flash.
Parking brake engaged warning buzzer
■
P. 412
Usage in winter time
■
P. 275
NOTICE
When parking the vehicle
■
Before you leave the vehicle, set the parking brake, shift the shift lever to P and make
sure that the vehicle does not move.
When the system malfunctions
■
Stop the vehicle in a safe place and check the warning messages.
When the parking brake cannot be released due to a malfunction
■
Use the parking brake release tool to manually release the parking brake. (P. 449)
Driving the vehicle with the parking brake set will lead to brake components overheat-
ing, which may affect braking performance and increase brake wear.
GS450h_OM_OM30E99U_(U)
*
, the maximum amount of braking