Internal Lens Assembly Replacement - Philips VL3500 WASH Service Manual

Internal Lens Assembly Replacement

21.9686.2150
Parts:
Repair Procedure
Step 1. At the control console or the luminaire menu, close the split lens assembly.
Step 2. Disconnect luminaire AC input cable from power source.
Step 3. Remove the Color/Dimmer/Strobe Assembly. See
Replacement" on page 31
Step 4. At the interconnect board, disconnect the zoom motor and split lens motor connectors.
Step 5. As shown in
interconnect board.
Step 6. Remove one 6-32 x 3/8" PPZ SEMS screw and remove the #8 cable saddle.
Step 7. Remove the three 6-32 x 3/8" PPB screws.
Step 8. Remove the split lens assembly.
Step 9. Replace the split lens assembly in reverse order.
02.96 86.001 0 A
M P
AINTENANCE ROCEDURES
for complete instructions.
Figure 2-9, remove the two 6-32 x 3/8" PPZ SEMS screws and remove the
: I L A
NTERNAL ENS SSEMBLY
"Color/Dimmer/Strobe Assembly
2
R
EPLACEMENT
33