Power Supply (Lvs) Replacement - Philips VL3500 WASH Service Manual

Power Supply (LVS) Replacement

69.3177.0151
Parts:
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. As shown in
display-side top cover and remove the cover.
Step 3. At power supply, disconnect wiring:
Step 4. Remove one 6-32 x 3/8" LG PPZ screw at the wiring end of the LVS.
Step 5. Loosen two 6-32 x 3/8" LG PPZ screws and slide the LVS towards upper enclosure fan to
remove it.
Step 6. Replace by performing steps 2 through 5 in reverse order.
02.96 86.001 0 A
M P
AINTENANCE ROCEDURES
Figure 2-16, at the enclosure, remove two 6-32 x 1/4" LG PPZ screws from the
Location Connector
N White AC Wires
L Black AC Wires
V + Red DC Wires
V - Black DC Wires
: P S (LVS) R
OWER UPPLY
2
EPLACEMENT
45