❋
VARI
LITE® - VL3500™ W
Ignitor Board Replacement
24.9661.3126
Parts:
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At tilt-side leg, remove yoke leg cover by removing four 6-32 x 5/16" screws.
CAUTION: Always use anti-static precautions when working with PCBs.
ESD
Step 3. Disconnect ignitor PCB wires by removing four screws that secure wire ring terminals to
PCB and remove ignitor PCB.
Step 4. Remove four 6-32 x 3/8" screws.
Step 5. Replace by performing steps 2 through 4 in reverse.
Note: Make sure and orient ignitor properly (as shown in
Mounting Plate
Ignitor Board
38
L
S
ASH
UMINAIRE
Remove Ignitor Board
Mounting Screws
Figure 2-12: Ignitor Board Replacement
M
ERVICE
ANUAL
Figure
2-12).
02 .9 686 .00 10 A