Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet COLORBAND PIX-M USB User Manual

O
PERATION
4. O
PERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
B
UTTON
<MENU>
<UP>
<DOWN>
<ENTER>

Menu Map

M P
ODE ROGRAMMING
5Ch
6Ch
8Ch
DMX Mode 10Ch
17Ch
32Ch
36Ch
Static Colors C--
Tilt Setting t--
Automatic
P--
Programs
Auto Speed S--
Sound-Active
Snd
Mode
Sound
Sens
Sensitivity
Custom
U--
Color Mixing
Infrared
SEt
Mode
Dimmer
dIM
Speed Mode
Offset OFFS

Configuration (DMX)

The COLORband PiX-M USB works with a DMX controller. Information about DMX is in the CHAUVET
DMX Primer, which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The COLORband PiX-M USB uses up to 36 DMX channels, which defines the highest configurable
address as 477.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 5Ch, 6Ch, 8Ch, 10Ch, 17Ch, 32Ch, or 36Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d 1–512.
4. Press <ENTER>.
COLORband PiX-M USB User Manual Rev. 1
F
UNCTION
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
L
EVELS
d 1–512
C 1–18
t 0–100
P 1–14
S 1–100
Snd
u 0–100
r000–255
g000–255
b000–255
ON
OFF
OFF
dIM1
dIM2
dIM3
0–255
D
ESCRIPTION
5-channel DMX mode
6-channel DMX mode
8-channel DMX mode
10-channel DMX mode
17-channel DMX mode
32-channel DMX mode
36-channel DMX mode
Static Colors
Tilt setting (0–50 static, 51–100 auto, slow to fast)
Automatic programs
Program speed for P1–10
Sound-active program
Sets sound sensitivity
Custom static colors
Combine red, green, and blue
Turns infrared on or off
Dimmer speed settings:
Off, fast, medium, or slow
Sets offset (calibrates tilt)
http://www.chauvetlighting.com/downloads/
Page 6 of 20