Callp (34) - Cisco BTS 10200 Troubleshooting Manual

Chapter 4 Call Processing Troubleshooting

CALLP (34)

To monitor and correct the cause of the event, refer to the
Received—Call Processing (34)" section on page
DESCRIPTION Dial Plan Information Not Found for Digits Received
SEVERITY WARNING
THRESHOLD 100
THROTTLE 0
DATAWORDS Calling Number–STRING [20]
Called Number–STRING [20]
Dial Plan Index–FOUR_BYTES
PRIMARY The call could not be completed because the number entered could not be located in the dial-plan.
CAUSE
PRIMARY Check the provisioning and the number dialed.
ACTION
CALLP (35)
To monitor and correct the cause of the event, refer to the
Found—Call Processing (35)" section on page
DESCRIPTION Dial Plan Information for Test Call Not Found
SEVERITY WARNING
THRESHOLD 100
THROTTLE 0
DATAWORDS Dial Plan Index–FOUR_BYTES
PRIMARY The test call could not be completed because the number entered could not be located in the dial-plan.
CAUSE
PRIMARY Check the provisioning and the number tested.
ACTION
OL-8723-19
"Dial Plan Information Not Found for Digits
4-28.
"Dial Plan Information for Test Call Not
4-29.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Call Processing Events and Alarms
4-17