Table of Contents
Advertisement
GENERAL INFORMATION
Condensation in the Exterior Front
Lamps and Rear Lamps
Exterior front lamps and rear lamps have
vents to accommodate normal changes
in air pressure.
Condensation can be a natural by-product
of this design. When moist air enters the
lamp assembly through the vents, there is
a possibility that condensation can occur
when the temperature is cold. When
normal condensation occurs, a fine mist
can form on the interior of the lens. The
fine mist eventually clears and exits
through the vents during normal operation.
Clearing time may take as long as 48 hours
under dry weather conditions.
Examples of acceptable condensation are:
•
The presence of a fine mist (no streaks,
drip marks or large droplets).
•
A fine mist covers less than 50% of the
lens.
Examples of unacceptable condensation
are:
•
A water puddle inside the lamp.
•
Streaks, drip marks or large droplets
present on the interior of the lens.
If you see any unacceptable condensation,
have your vehicle checked by an authorized
dealer.
Ford GT (CGX) Canada/United States of America, enUSA, First Printing
Lighting
LIGHTING CONTROL
E252122
A
Off.
B
Parking lamps, instrument panel
lamps, license plate lamps and
rear lamps.
C
Headlamps.
D
Autolamps.
High Beams
E227823
A
High beam control.
Press the button briefly to flash the high
beams.
57
Advertisement
Table of Contents
