Adjusting The Headlamps - Ford GTN 2017 Owner's Manual

E233208
Note: To avoid damaging the windshield,
lift the wiper blade a few inches off the
glass and place a cloth on the windshield
under the blade.
Note: Manually move the wiper blades to
the midway position.
Note: The windshield wiper blades are
different in length. The longer blade is on
the driver's side.
1. Disconnect the washer pipe from the
wiper arm.
2. Press the release button on the top of
the wiper arm where the blade
assembly attaches to the arm.
3. Pull the blade assembly away from the
arm, while rocking it from side to side
to help release it.
4. Keep the cloth in place to avoid the
arm from hitting the windshield glass.
5. Install the new blade assembly and
reconnect the washer pipe.
6. When complete, switch on the wipers
and they will cycle back to the park
position when you switch them off.
Replace wiper blades at least once per
year for optimum performance.
Ford GT (CGX) Canada/United States of America, enUSA, First Printing
Maintenance

ADJUSTING THE HEADLAMPS

Headlamp Aim Target
E142592
A
B
C
D
Vertical Aim Adjustment
1. Park your vehicle on a level surface
approximately 25 ft (7.6 m) away from
a vertical wall or screen.
2. Apply the parking brake.
3. Measure the height from the center of
the headlamp to the ground.
Note: There may be an identifying mark on
the lens to help you locate the center of the
headlamp bulb.
4. Mark a horizontal reference line on the
vertical wall or screen that is a
minimum of 8 ft (2.4 m) long.
5. Switch the low beam headlamps on.
160
8 ft (2.4 m).
Center height of lamp to ground.
25 ft (7.6 m).
Horizontal reference line.