Technical Specifications - Ford GTN 2017 Owner's Manual

Note: If you are not sure about the proper
tire inflation pressures, contact an
authorized dealer or service center.
E247515

TECHNICAL SPECIFICATIONS

Wheel Lug Nut Torque Specifications
When you install a wheel, always remove any corrosion, dirt or foreign materials
present on the mounting surfaces of the wheel or the surface of the wheel hub,
brake drum or brake disc that contacts the wheel. Make sure to secure any fasteners
that attach the rotor to the hub so they do not interfere with the mounting surfaces of
the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting
surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle
is in motion, resulting in loss of vehicle control, personal injury or death.
Bolt size
M14 X 1.5
*
Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford
recommended replacement fasteners.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any
wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
Ford GT (CGX) Canada/United States of America, enUSA, First Printing
Wheels and Tires
Your tires may require additional inflation
pressure for operation at speeds greater
than 165 mph (265 km/h). If this label is
present on your vehicle, you must adjust
the tire pressure accordingly.
WARNING
193
*
Ib-ft (Nm)
150 lb.ft (204 Nm)