Spirit CT900 Owner's Manual page 9

STEP 1
1. Loosen the 8 screws holding the MOTOR COVER (37) in place and remove the cover.
2. Uncoil wiring harness and run wires through the RIGHT UPRIGHT (7).
3. Use 5 BOLTS (65) and 5 LOCK WASHERS (79) to attach the RIGHT UPRIGHT (7) to the MAIN
FRAME (1). Do not pinch wires. Do not tighten before putting the console on.
4. Use 5 BOLTS (65) and 5 LOCK WASHERS (79) to attach the LEFT UPRIGHT (8) to the MAIN
FRAME (1). Do not tighten before putting the console on.
-8-