Diagnostic Aids; Test Mode; Test Page - Lexmark S 500 SERIES Service Manual

3. Diagnostic aids

Test mode

Test page

This test prints the test page.
To run a complete test page of black and color patterns, be sure the printhead tanks are in good condition.
To enter the test:
1. Turn on the All-In-One.
2. Lift the scanner unit.
3. Install good print tanks in the carrier.
4. Close the scanner unit.
5. Load paper in the paper tray.
6. Press Setup.
7. Press until Maintenance appears on the LCD.
8. Press OK .
9. Press until Print Test Page appears on the LCD.
10. Press OK to print the test page.
The test page consists of the following information:
• Product information
• Hardware status
• Network information
• Printhead information
• Ink information
• Event history
• Alignment
Lexmark S500 Series
3-1
Diagnostic aids