Note
•
Make sure that the answering machine is
switched on before this feature can be
applied.
Tip
•
When you access the answering machine
remotely, you are recommended to set
the ring delay to [Toll saver] mode. This
is a cost effective way to manage your
messages. When there are new messages,
the answering machine picks up the call after
3 rings; When there is no messages, it picks
up the call after 5 rings.
Remote access
You can operate your answering
machine when you are away from
home. Simply make a call to your
phone with a touch tone phone and
enter your 4-digit PIN code.
Note
•
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote
access
You can allow or block remote access
to the answering machine.
1
Press
/
or [Menu] > [Answer
machine] > [Remote access], then
press [OK] to confirm.
2
Select [Activate]/[Deactivate], then
press [OK] to confirm.
» The setting is saved.
32
EN
Change the PIN code
1
or [Menu] > [Answer
Press
/
machine] > [Remote access] >
[Change PIN], then press [OK] to
confirm.
2
Enter the old PIN, then press [OK]
to confirm.
3
Enter the new PIN code, then
press [OK] to confirm.
4
Enter the new PIN code again,
then press [Save] to confirm.
» The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number
with a touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN code.
» You now have access to your
answering machine, and you
can now listen to the new
messages.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function.
See the Remote access commands
table below for a list of available
functions.
Note
•
When there is no message, the phone hangs
up automatically if no key is pressed for 8
seconds.