Table of Contents
Advertisement
placed correctly on the base station,
you hear a docking tone.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
•
Over time, capacity of batteries decreases.
This is a normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current
battery level.
When the handset is off
the base station, the bars
indicate the battery level
(full, medium and low).
When the handset is on the
base station/charger, the
bars flash until charging is
complete.
The empty battery icon
flashes. The battery is low
and needs recharging.
The handset LCD backlight turns off if
the battery level is low. The handset
turns off if the batteries are empty.
If you are on the phone, you hear
warning tones when the batteries
are almost empty. The call gets
disconnected after the warning.
What is standby mode?
Your phone is in standby mode when
it is idle. The handset name, date
and time, and handset number are
10
EN
displayed on the handset screen.
When the handset is on the base
station, the clock screensaver will
be displayed after a while if there is
no event like missed calls or voice
message.
Display icons
In standby mode, the icons shown on
the main screen tell you what features
are available on your handset.
Icon
Descriptions
When the handset is off the
base station/charger, the
bars indicate the battery
level (from full to low).
When the handset is on
the base station/charger,
the bars keep scrolling until
charging is complete.
The empty battery icon
flashes and you hear an alert
tone.
The battery is low and needs
recharging.
It shows the connection
status between the handset
and base station. The more
bars are shown, the better
the signal strength is.
It remains steadily on when
browsing incoming calls in
the call log.
It remains steadily on when
browsing outgoing calls in
the redial list.
Advertisement
Table of Contents
