Eco+ Mode; Name The Handset; Set The Date And Time; Set The Display Language - Philips M770 Extended User Documentation

ECO+ mode

When the ECO+ mode is activated, it
eliminates the radiation of the handset
and base station in standby mode.
1
Select [Menu] > [Phone setup] >
[ECO+ mode], then press [OK] to
confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO+ is displayed in standby
mode after a while.
Note
•
Make sure that all the handsets registered to
the base station are M770/M775 in order to
have the ECO+ feature functioning properly.
•
When ECO+ is activated, the standby time is
reduced. This is because in ECO+ mode the
base station is not transmitting any signal in
standby mode; therefore the handset needs
to "listen" more frequently for signals from
the base station to detect incoming calls
or other requests from the base station.
The time it takes for the handset to access
features like call setup, call log, paging, and
phonebook browsing is also delayed. The
handset will not alert you to link loss in case
of power loss or moving out of range.
The following table shows you the
current status of the handset screen
with different Eco mode and ECO+
mode settings.
Eco ECO+
mode mode
[Off] [Off]
[Off] [On]
[On] [Off]
26
EN
Handset icon
display
and are off.
is displayed
only after the ECO+
mode is activated
during standby
mode .
is displayed.
[On] [On]

Name the handset

The name of the handset can be up
to 14 characters. It is displayed on the
handset screen in standby mode.
1
Select [Menu] > [Phone setup] >
[Phone name], then press [OK] to
confirm.
2
Enter or edit the name. To erase a
character, press [Clear].
3
Press [OK] to confirm.
» The setting is saved.

Set the date and time

For information, see 'Set the date and
time (see 'Set the date and time' on
page 9)'.

Set the display language

Note
•
This feature only applies to models with
multiple-language support.
•
Languages available vary from country to
country.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to
confirm.
2
Select a language, then press [OK]
to confirm.
» The setting is saved.
is displayed and
changed to when
the ECO+ mode is
activated in standby
mode.