Install The Handset; Configure Your Phone (Country Dependent) - Philips M770 Extended User Documentation

Install the handset

The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
Warning
•
When replacing the batteries, check the
battery polarity. Incorrect polarity may
damage the product.
8
EN
Configure your phone
(country dependent)
1
When using your phone for the first
time, you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then
press [OK] to confirm.
» The country/language setting is
saved.
Note
•
The country/language setting option is
country dependent. If no welcome message
is displayed, it means the country/language
setting is preset for your country. Then you
can set the date and time.
To reset the language, see the
following steps.
1
Select [Phone setup] > [Language],
then press [OK] to confirm.
2
Select a language, then press [OK]
to confirm.
» The setting is saved.