Table of Contents
Advertisement
Note
•
The maximum length of a detect number is
10 digits. The maximum length of an auto
prefix number is 10 digits.
•
This is a country dependent feature.
Set auto prefix
1
Select [Menu] > [Services] > [Auto
prefix], then press [OK] to confirm.
2
Enter the detect number, then
press [OK] to confirm.
3
Enter the prefix number, then press
[OK] to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
•
If the prefix number is set and the detect
number is left empty, the prefix number is
added to all outgoing calls.
•
The feature is unavailable if the dialed
number starts with * and #.
Select the recall
duration
Make sure that the recall time is set
correctly before you can answer
a second call. In normal case, the
phone is already preset for the recall
duration. You can select among 3
options: [Short], [Medium] and [Long].
The number of available options varies
with different countries. For details,
consult your service provider.
1
Select [Menu] > [Services] > [Recall
time], then press [OK] to confirm.
2
Select an option, then press [OK]
to confirm.
» The setting is saved.
38
EN
Dial mode
•
Dial mode is the telephone signal
used in your country. The phone
supports tone (DTMF) and pulse
(rotary) dial. Consult the service
provider for detailed information.
Set the dial mode
1
2
.
•
Auto clock
•
•
It synchronizes the date and time
on your phone with the public
switched telephone network (PSTN)
automatically. For the date to be
Note
This feature only applies to models that
support both tone and pulse dial.
Select [Menu] > [Services] > [Dial
mode], then press [OK] to confirm.
Select a dial mode, then press
[OK] to confirm.
» The setting is saved.
Note
If your phone is in pulse dial mode, press
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
Note
This service is country and network
dependent.
Make sure you have subscribed to the caller
ID service before you use this feature.
Advertisement
Table of Contents
