Table of Contents
Advertisement
Set flash time
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long].The number of
available options varies in different countries.
For details, consult your service provider.
1
Press
.
2
Select [BS SETTINGS] > [FLASH TIME],
then press
There are 3 options: SHORT, MEDIUM
(by default), and LONG.
3
Select an option, then press
confirm.
The setting is saved.
Change PIN
1
Press
.
2
Select [BS SETTINGS] > [CHANGE PIN],
then press
[OLD PIN? - - - -] displays; the "- - - -"
cursor flashes. Default 4-digit PIN is
0000.
To erase a character, press
The PIN will be masked as ****.
3
Enter the current 4-digit PIN and then
press
to confirm.
If the old PIN is correct, it will show
[NEW PIN? - - - -] with the "- - - - "
cursor flashes.
4
Enter the new PIN, then press
5
Re-enter the new PIN to double confirm.
Press
to save.
The setting is saved.
EN
32
to confirm each selection.
to
to confirm each selection.
.
.
Set ECO mode
You can reduce transmission power by setting
the ECO mode.
1
Press
.
2
Select [BS SETTINGS] > [ECO MODE],
then press
3
Select [ON] or [OFF], then press
confirm.
The setting is saved.
to confirm each selection.
to
Advertisement
Table of Contents
