Epson Pro Cinema LS10500 User Manual page 90

Setting
3D Setup
Aspect
Tracking
Sync.
Options
3D Display
2D-to-3D Conversion
3D Format
3D Depth
Diagonal Screen Size
Inverse 3D Glasses
3D Viewing Notice
See the list of available aspect
ratios
Varying levels available
Varying levels available
90
Description
Selects various 3D options for 3D
image sources
3D Display: enables 3D mode
2D-to-3D Conversion: converts
2D images to 3D; set 3D Format
to Auto or 2D
3D Format: selects the 3D
format
3D Depth: sets the depth for the
3D image
Diagonal Screen Size: selects
the actual size of the screen to
maximize the 3D effect
Inverse 3D Glasses: reverses
the images projected for the left
and right eyes (enable only if 3D
images do not display correctly)
3D Viewing Notice: enables the
viewing notice displayed when
using 3D mode
Sets the aspect ratio (width-to-
height ratio) for the selected input
source
Adjusts signal to eliminate
vertical stripes in computer
images from the PC input port
Adjusts signal to eliminate
fuzziness or flickering in
computer images; for best
results, adjust the Tracking
setting before adjusting the
Sync. setting to improve the
accuracy of the adjustments