Epson Pro Cinema LS10500 User Manual page 119

Power light Status light
Blue Flashing blue
Off Off
Blue Off
Flashing blue Varies
Off Flashing blue
Laser light Temp light
Off Off
Off Off
Off Off
Varies Flashing
orange
Off Orange
119
Status and solution
Warming up; wait for an image to
appear
or
Shutting down; when the status light
stops flashing, you can unplug the
projector
Standby or sleep mode
Standby mode (with Communication
On)
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Projector has overheated and turned
off; leave it turned off until it cools
down, then do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If the problem persists, unplug the
projector and contact Epson for
help