Table of Contents
Advertisement
You see this screen:
5. Select one of the following options:
• Load Lens Position: Overwrites your current focus, zoom, and lens shift settings with saved
settings
Note: You can load the saved settings from Memory1 or Memory2 by pressing the Lens1 or
Lens2 buttons on the remote control.
• Save Lens Position: Saves your current focus, zoom, and lens shift settings to memory (10
memories with different names are available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Lens Position: Erases the selected lens position settings
• Rename Lens Position: Renames a saved lens position (12 characters maximum)
6. Press Esc to exit.
Parent topic:
Adjusting Projector Features
83
Advertisement
Table of Contents
