Epson Pro Cinema LS10500 User Manual page 120

Power light Status light
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Flashing blue Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related tasks
Cleaning the Air Filter
Replacing the Air Filter
Laser light Temp light
Orange Off
Off Flashing
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Off
orange
Flashing Flashing
orange orange
120
Status and solution
Laser has a problem or failed to turn
on
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Cinema filter, static iris, or lens
shutter error; turn the projector off,
unplug it, and contact Epson for help
Laser driver error; turn the projector
off, unplug it, and contact Epson for
help
Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Fatal error; turn the projector off,
unplug it, and contact Epson for help