Downloading/Uploading The Bht System Parameter File; Parameter Menu) - Denso BHT-604Q User Manual

4.5.11 D ownloading/Uploading the BHT System Parame er File
(SYSTEM PARAMETER Menu)
The system parameter file (file name: "_BHT.SYS") is a file containing s
contrast and beeper volume set at section "4.5.5 Settin
T he same settings can be set at another BHT by copying the system pa
Copying the System Parameter File
(1) Upload the system parameter file to the host
(2) Download the uploaded system parameter fil
The system parameter file can also be copied directly betwee
- Sup plement -
their respective UPLOAD and DOWNLOAD menus.
Refer to section "4.5.4 Copying Files between 2 BHT Units" for details of the copy
method.

U ploading the System Parameter File
C reate a system parameter file based on the current setting values and upload it to the host computer and
so on. After uploading, delete the created system parameter file.

D ownloading the System Parameter File
R eceive the system parameter file from the host computer and so on to which it was backed up, and after
s etting the stored values, delete the received system parameter file.
The communication parameters, communication protocol, and interface set at "[5] Setting the
communication environment" in section "4.5.5 System Environment Settings" are used when uploading
and downloading.
Use the following procedure to download and upload the system parameter file.
1.
Press the 3 key while holding down the SF key at the SYSTEM MENU.
The SYSTEM PARAMETER menu screen displays as shown on the right.
[1: Download]:
Downloads the BHT system parameter file to the BHT user area.
[2: UPLOAD]:
Uploads the BHT system parameter file stored in the BHT.
Refer to the following section for details of the above items.
Press the C key to return to the SYSTEM MENU.
2D Code Handy Terminal
g environment Settings".
rameter file to that BHT.
computer and so on.
e at another BHT.
t
ett ings such as values, LCD
n two BHT units by opening
123