Table of Contents
Advertisement
[ 11 ] Downloading/Uploading the BHT System Parameter File
The BHT system parameter file (named "_BHT.SYS") stores system environment settings specified in
the SET SYSTEM menu (in Section 2.5.3, [ 4 ]) and other settings such as the LCD contrast and beeper
volume.
The SYSTEM PARAMETER transfer menu allows you to upload or download the BHT system
parameter file to/from the host computer. This makes it possible to copy the settings made in a single
BHT onto other BHTs. First, make settings in a particular BHT and upload the BHT system parameter
file to the host computer by using this menu ("2: UPLOAD"). Next let other BHTs download the file from
the host computer by using this menu ("1: DOWNLOAD").
Without the host computer, you may directly copy the BHT system parameter file between two BHTs
(one BHT runs UPLOAD and the other, DOWNLOAD). For the preparation to be made beforehand,
refer to
on page 47.
If you select the "2: UPLOAD," the system will set up the BHT system parameter file based on the
current settings and upload it to the host computer. After that, the created file will be deleted.
If you select the "1: DOWNLOAD," the BHT will receive the BHT system parameter file from the host
computer and read in the values stored in the file. After that, the received file will be deleted.
For uploading/downloading, the BHT will use the communications parameters, communications protocol,
and interface port specified in Section 2.5.3, "[4.5] Setting the communications environments."
SYSTEM PARAMETER transfer menu
On the SYSTEM MENU, pressing the 3 key with the SF key held
down calls up the screen shown at left.
[1] DOWNLOAD: Downloads the BHT system parameter file to the
user area of the BHT.
[2] UPLOAD:
Uploads the BHT system parameter file stored in
the BHT.
Select the desired item directly using the corresponding numerical
keys or indirectly using the F5 and F6 keys, then press the ENT key.
Press the C key to return to the SYSTEM MENU.
116
Advertisement
Chapters
Table of Contents
