Updating The System (Modify Menu) - Denso BHT-604Q User Manual

BHT-604Q
4.5.14 Updating the Sy
Use the following procedure to update the system.
1.
Press the dot key while holding down the SF key at the SYSTEM MENU.
The MODIFY MENU screen displays as shown on th
[1 : SYSTEM MODIFY]: Updates the BHT system.
[2 : CU-F/W MODIFY]: Updates the CU-611 system.
R efer to the following section for details of the above items.
P ress the C key to return to the SYSTEM MENU.
[1] Updating the BHT system
Update the BHT system after downloading the BHT system update file.
(Refer to section "4.2.1 Updating the BHT System" for details.)
1.
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1 : SYSTEM MODIFY] and then press the ENT key.
T he screen displays as shown on the right.
If the downloaded BHT update file name differs from this file name, specify
th e correct file name using the procedure on the following page.
[1 : DO IT]:
Updates the BHT system.
[2: FILENAME]:
Displays the filenam
Press the C key to return to the SYSTEM PARAMETER menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1: DO IT] and then pre
T he screen shown displays as shown on the right and the BHT system is
u pdated.
U pon completion of the update, the BHT power turns OFF automatically.
130
stem (MODIFY MENU)
e to be used for updating the BHT system.
ss the ENT key.
e right.