Temperature Alerts; Select Temperature Alerts; Temperature Alerts Arm/Disarm - La Crosse Technology T83646 Manual

The snooze option can be repeated three times.

The alarm icon will flash while the snooze feature is active.

Note: While the alarm sounds, you may press any button except the TIME ALARM
button to turn the alarm off.

Temperature Alerts

Setting the temperature alerts are separate from turning the alerts ON or OFF.
Temperature alert buttons:
1. Hold the TEMP ALERTS button until the station beeps.
2. The temperature alert value will blink in set mode.
3. To adjust alert values press the DOWN or UP ARROW buttons.
4. Press the TEMP ALERTS button to confirm & move to the next alert.
Select Temperature Alert Values
Temperature Alert value will flash individually in the outdoor or indoor temperature area
when selected to be set. The alert is not active just from selecting the value. Hold the
TEMP ALERT button for five seconds to select and set temperature alert values. To
skip an alert value and move to the next, simply press the TEMP ALERT button again.
1. OUTDOOR HI alert will flash.
2. Press the ARROW buttons to set the alert value.
3. Press the TEMP ALERT button to confirm and switch to OUTDOOR LOW setting.
4. OUTDOOR LO alert will flash.
5. Press the ARROW buttons to set the alert value.
6. Press the TEMP ALERT button to confirm and switch to INDOOR HI setting.
7. INDOOR HI alert will flash.
8. Press the ARROW buttons to set the alert value.
9. Press the TEMP ALERT button to confirm and switch to INDOOR LOW setting.
10. INDOOR LO alert will flash.
11. Press the ARROW buttons to choose the value.
12. Press the TEMP ALERT button to confirm and exit.
Note: After selecting temperature alert values, use the next step to turn arm or disarm alerts.
One or all of the HI and LO temperature alerts may be set.
Range for indoor temperature alert:

Range for outdoor temperature alert: -40°F to 140°F (-40°C to 60°C)

Arm/Disarm Temperature Alerts
Press & release TEMP ALERT button to view alerts in normal time display.
UP ARROW arms temperature alerts.
DOWN ARROW disarms temperature alerts.
ALERT BELL ICON appears when armed.
Note: When no temperature alerts are set, the Temperature Alert area will show ALERTS OFF.
1. In normal time mode, hold then release the TEMP ALERT button to toggle between:
o
Outdoor HI
o
Outdoor LO
o
Indoor HI
o
Indoor LO
2. Press the UP ARROW button to arm the selected alert.
3. The alert icon appears when alarm is activated.
4. Press the DOWN ARROW button to disarm the selected alert.
Model T83646
+32°F to +122°F (0°C to 50°C)
www.lacrossetechnology.com/support Page | 5