12-Hour Or 24-Hour Time Format; Set Time; Fahrenheit/Celsius; Alarm Time - La Crosse Technology T83646 Manual

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
Note: When in 12-hour format, AM or PM will show in front of the hour.
1. Hold the SETTINGS button for three seconds to enter time set mode.
2. 12H will flash.
3. Use the ARROW buttons to choose 12-hour or 24-hour time format.
4. Press the SETTINGS button to confirm and move to set time.

Set Time

To set the time manually:
1. The Hour digit will flash.
2. Use the ARROW buttons to choose the hour.
3. Press the SETTINGS button to confirm and move to minutes.
4. The Minutes will flash.
5. Use the ARROW buttons to choose the minutes.
6. Press the SETTINGS button to confirm and move to select Fahrenheit/Celsius.

Fahrenheit/Celsius

1. °F or °C will flash.
2. Use the ARROW buttons to select Fahrenheit or Celsius.
3. Press and release the SETTINGS button to confirm and exit
the program menu.
Note: When no buttons are pressed for ten seconds, the
weather station will save the last change and default back to normal mode.

Alarm Time

Time alarm buttons:
1. Hold the TIME ALARM button to enter alarm set mode.
2. To adjust values press the DOWN or UP ARROW buttons.
3. Press the TIME ALARM button to confirm adjustments and move to the next item.
Set Time Alarm
In normal mode, press and release the TIME ALARM button once to show alarm time. Hold the TIME
ALARM button for three seconds to enter alarm set mode.
1. The Hour will flash.
2. Use the ARROW buttons to set the hour.
3. Press the TIME ALARM button to confirm and switch to minutes.
4. The Minutes will flash.
5. Use the ARROW buttons to set the minutes.
6. Press TIME ALARM button to confirm and exit.
Note: When no buttons are pressed for 20 seconds the weather station will save the last change and
default back to normal time mode.
Activate/Deactivate Time Alarm
In normal mode, press and release the TIME ALARM button once to show alarm time.

Press and release the TIME ALARM button repeatedly to turn ON/OFF alarm.

The alarm icon appears when alarm is activated.

Note: The crescendo alarm will ring for 2 minutes then turn off if no buttons are pressed.
Snooze
When the alarm sounds, press the TIME ALARM button to snooze the alarm for 10 minutes.

Model T83646 www.lacrossetechnology.com/support
12H
Page | 4