Grizzly G0817 Owner's Manual page 24

4. Secure table to trunnion using (4) M8-1.25 x
25 hex bolts, (4) 8mm lock washers, and (4)
8mm flat washers (see Figure 26).
x 4
Figure 26. Table to trunnion mounting hardware
installed.
5. Install table insert (see Figure 27).
6. Install table gap screw assembly, secure with
(1) M8-1.25 hex nut and (1) 8mm flat washer
(see Figure 27), then tighten gap screw to
ensure table surface is flush across gap.
Table Insert
Gap Screw
Assembly
Figure 27. Table insert and gap screw installed.
-22-
7.
8.
Hex Nut
and Washer
9.
Install fence support using (2) M6-1 x 12 cap
screws and 6mm flat washers (see Figure 28).
x 2
Figure 28. Installing fence support.
Install fence rail using (2) M6-1 x 20 hex
bolts, (2) 6mm lock washers, and (2) 6mm flat
washers (see Figure 29).
x 2
Fence Rail
Figure 29. Installing fence rail.
Thread (1) M8-1.25 hex nut onto lock lever,
install lock lever onto fence base, then tighten
hex nut to secure (see Figure 30).
Lock
Lever
Hex Nut
M8-1.25
Figure 30. Fence base lock lever installed.
Model G0817 (Mfd. Since 05/16)
Fence Support
Fence
Base