Ec Declaration Of Conformity - Stanley STHR263 Original Instructions Manual

EC declaration of conformity

MACHINERY DIRECTIVE
STHR263
STANLEY declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-6
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
01.2015
(Original instructions)
Two years full warranty
If your Stanley product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, Stanley Europe guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual.
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised
persons;
• Proof of purchase is produced.
• The Stanley product is returned complete with all original
components
If you wish to make a claim, contact your seller or check the
location of your nearest authorised Stanley repair agent in
the Stanley catalogue or contact your local Stanley office at
the address indicated in this manual. A list of authorised
Stanley repair agents and full details of our after sales
service is available on the internet at:www.stanleytools.com
ENGLISH
9