Table of Contents
Advertisement
Note: Your NBG6817 has a WPS button located on its rear panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The NBG6817 sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the NBG6817 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG6817 and wireless client (the NWD210N in this example).
Figure 36 Example WPS Process: PBC Method
8.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG6817's configuration
interface and the client's utilities.
Launch your wireless client's configuration utility. Go to the WPS settings and select the PIN method
1
to get a PIN number.
Enter the PIN number to the PIN field in the Expert > Wireless > WPS screen on the NBG6817.
2
Wireless Client
SECURITY INFO
COMMUNICATION
NBG6817 User's Guide
Chapter 8 Tutorials
START
WITHIN 2 MINUTES
50
Access Point
WPS
Advertisement
Table of Contents
