Static Dhcp Screen - ZyXEL Communications armor z2 NT8700-ROG User Manual

Table 37 Expert Mode > LAN > LAN IP (continued)
LABEL
DHCP Server
IP Pool Starting
Address
Pool Size
Apply
Cancel

12.5 Static DHCP Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses.
To change your NBG6817's static DHCP settings, click Expert Mode > LAN > Static DHCP.
Figure 77 Expert Mode > LAN > Static DHCP
The following table describes the labels on this screen.
Table 38 Expert Mode > LAN > Static DHCP
LABEL
#
MAC Address
IP Address
Add/Delete
Chapter 12 LAN
DESCRIPTION
Select Enable to activate DHCP for LAN.
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a server.
Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable
to stop the NBG6817 acting as a DHCP server. When configured as a server, the
NBG6817 provides TCP/IP configuration for the clients. If not, DHCP service is
disabled and you must have another DHCP server on your LAN, or else the computers
must be manually configured. When set as a server, fill in the following four fields.
This field specifies the first of the contiguous addresses in the IP address pool for LAN.
This field specifies the size, or count of the IP address pool for LAN.
Click Apply to save your changes back to the NBG6817.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row). Select Auto Detection to
automatically detect the MAC address of a computer on your LAN. Otherwise, select
User define to enter the MAC address of a computer on your LAN in the MAC Address
field.
This field displays the MAC address of a computer on your LAN. If you select User
define in the # field, enter the MAC address(es) manually.
This field displays the LAN IP address of a computer on your LAN. If you select User
define in the # field, enter the IP address(es) manually.
Click to add the rule in the MAC filter summary table.
Click to remove a rule.
NBG6817 User's Guide
114