Initial Setting; Test 55 To 60; Test 61 - Function: Factory Set; Test 62 - Function: Exiting Test Mode - Yamaha TYROS4 Service Manual

Tyros4

Test 55 to 60

Factory Inspection only.
Test 61
Function: Factory Set
Description:
Restores the Tyros4 to the factory initial setup.
(Sets the initial data to the Flash ROM.)
Displayed Message:
０６１：Ｆａｃｔｏｒｙ Ｓｅｔ
０６１：Ｆａｃｔｏｒｙ Ｓｅｔ
ＯＫ
Supplement:
In this stage, the fl ag for initialization is raised only and
initialization will be executed when the power is turned on
next time.
Caution
Don't turn off the power until the main screen is indicated
after executing the "Factory Set".

INITIAL SETTING

Setting at the time of factory shipping.
• MASTER VOLUME:
• MIC GAIN:
• MODURATION WHEEL:
• AUX IN/LOOP RETURN TRIM VOLUME: MIN
• SLIDER VOLUME:
98
Test 62
Function: Exiting test mode
Description:
Quits the test mode and restarts. (Restarting should be
conducted automatically. Check if the restarting is conducted.)
Displayed Message:
Supplement:
Don't turn off the power until the main screen is indicated
Selected screen
after executing the "Exiting test mode".
* When "Test 61: Factory Set" is executed, it takes about
* If the display is changed in the following order, the main
During execution
MIN
MIN
MIN (toward you)
MAX (top side)
０６２：Ｔｅｓｔ Ｅｘｉｔ
Caution
1 minute and 30 seconds for the main screen to appear after
the test mode ends.
screen will appear when the test mode is fi nished.
Force Format Mode. → Initializing regist backup. →
Tyros4 → Initializing system setup. → MAIN
Selected screen