Display Messages - Yamaha TYROS4 Service Manual

Tyros4

DISPLAY MESSAGES

[BOOTER]
Displayed message
Now loading. Please wait a moment...
Media error!
Installer program checksum error!
Please eject the media.
Please insert the Installer media.
Installer program not found!
Installer program data error!
Installer program data mismatch!
Program error!
Please install the program.
Error! Unformatted or incompatible data.
108
Meaning
Data is being loaded. Wait a
The installer fi le is being loaded.
while.
Installer fi le loading error (media error)
Media error! Failed in loading the installer fi le
Part of the media is damaged (I/O error)
Installer fi le loading error (checksum error)
Checksum in the installer fi le disagrees.
Installer checksum error!
File damaged
Tampered
Remove the media. When an error occurs
A media containing the installer is not connected
Install the installation media.
when the booter is started.
When the installation fi le is undetected
No installer found. The installer fi le corresponding to the
instrument is not found
The installer is defective
File damaged
Installation program error!
Tampered
Version mismatch
When the installer is mismatched
Loading of an installer for a different model has
Installation updater error! been attempted
Loading of an installer for a version which
cannot be updated has been attempted
Starting is disabled because the main program
Program error! has not been detected
The instrument program has not been installed
Install the program. same as above
The installer cannot be loaded from the installer
The media is not formatted in any one format of
Unformatted or unsupported
FAT12, FAT16 or FAT32
error!
Unformatted
System area in the media is damaged
Progress/status How to service
Replace the installation media and
perform again.
Perform again with a proper
installation fi le.
Replace the installation media and
perform again.
Confi rm the media or the
installation fi le.
Insert the media.
Disconnect the USB memory from
Tyros4 except the installation use.
Store the installation fi le again and
perform reinstallation.
Perform again with a proper
installation fi le.
Perform installation.
Perform again with the media
of the FAT12, FAT16 or FAT32
format.