LG GS205 Service Manual page 139

Interrupt Type
Incoming Call
Incoming CCBS Invoke
Incoming SMS
Incoming Voice Mail
Incoming CB Message
Charger Plug In
Earphone Plug In
Alarm Expired
Battery Low
Incoming SS
Incoming NITZ
1.12.5.4. Detailed Description
When the user selects the Date Query submenu item from the Socket Test menu, the
Date Query screen appears.
In the Date Query screen, the user can enter the IP address of the datetime server.
1. If no characters are input, RSK is labeled BACK and pressing RSK returns the user to the
Socket Test menu.
2. If input characters exist, RSK is DONE and pressing RSK invokes a confirmation window.
After pressing RSK DONE in the Date Query screen, a window asks the user to confirm
execution of the Date Query process.
1. Pressing LSK YES proceeds to the progress screen, described next.
2. Pressing RSK NO returns the user to the Socket Test menu.
After selecting LSK YES when the confirmation window appears, the Date Query process
starts and a progress screen indicates that the Date Query process is in progress.
1. Pressing RSK CANCEL cancels the Date Query process and takes the user back to the
Date Query screen.
2. Pressing the END key cancels the Date Query process and takes the user back to the idle
screen.
If the Date Query process fails, an error message appears indicating the cause of failure
and the user is returned to the Date Query screen or taken to the Socket Test menu, depending
on the failure cause.
If the date query process is successful, the result is shown to user.
Press RSK BACK takes the user back to the Socket Test menu.
1.13. Bluetooth
To test the Bluetooth Module.
Item Function Selection
General Test
Bluetooth RF Test
Get Chip Version
Bluetooth
Bluetooth UPF Test
Corresponding Operation
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Standard handling
Value
Press OK to Start testing
Press OK to Start testing
Press OK
Press OK to Start testing
Operation after Interrupt Handling
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
Restore the screen before the interrupt.
-139-
Description
To do the General Test
To test the Bluetooth RF
To get the Chip Version
To test Bluetooth UPF