LG GS205 Service Manual page 135

In the DNS Query screen the user enters a domain name to be resolved.
1.If no characters are input, RSK is labeled BACK and pressing RSK returns the user to the
Socket Test menu screen.
2.If input characters exist, RSK becomes CLEAR and pressing RSK deletes one single
character at the location of the cursor.
3.Pressing LSK OPTION takes the user to the Option menu, described in the following screen.
After pressing LSK OPTION in the DNS Query screen, the Option menu is shown.
1.Done: To start the DNS query process, as shown in the next screen.
2.Input Method: Allows the user to choose their preferred input method. After selecting the input
method, the user is taken back to the DNS Query screen to continue entering the domain name.
3.Pressing LSK OK proceeds with the highlighted menu item.
4.Pressing RSK BACK returns the user to the DNS Query screen.
After selecting Done in the Option menu, the DNS query process starts and a progress
screen is shown to indicate that the DNS query is in progress.
1.Pressing RSK CANCEL cancels the DNS query process and takes the user backl to the DNS
Query screen.
2.Pressing the END key cancels the DNS query process and takes the user back to the idle
screen.
If the DNS query process fails, an error message appears indicating the cause of failure
and the user is returned to the DNS Query screen or taken to the Socket Test menu, depending
on the failure cause.
If the DNS query process is successful, the result is shown to the user.
Pressing RSK BACK takes the user back to the Socket Test menu.
1.12.3. HTTP Get
The HTTP Get function obtains and displays a web page. The URL of web page is
specified by the user.
1.12.3.1. Predecessor
Socket Test menu
1.12.3.2. Possible Input and Followed Operations
Key Type Input Type
0-9,*,# P
, Side
↑ ↑
, Side
↓ ↓
P
←
P
→
LSK "Option" R
RSK "Back" R
RSK "Clear" R
RSk "Clear" LP
SEND
END LP
END P
Input Type: P=Press, R=Release, LP=Long Press
Condition: (1) No input characters
Input characters.
Move cursor one position left.
Move cursor one position right.
Go to option menu.
Return to the Socket Test menu.
Delete a single character at the current
location of the cursor.
Delete all input characters.
Power off the phone.
Go to the Idle screen.
(2) Input characters exist
Operation
-135-
Condition Followed
Section
(1) 1.11.1
(2)
(2)