LG GS205 Service Manual page 131

Mode]->Customize->Volume->Ring tone to change volume.
8.The parameters of Headset Mode are applied only when the headset is plugged in.
9.The parameters of LoudSp Mode are applied only when handsfree is turned on during a call.
1.5.2.Ring Tone
This audio setting is used to demonstrate all melodies on the MS,including iMelodies,Midis
and Sounds(MIDI format). Use the up and down keys to scroll over the ring tones: highlighting a
selection longer than one second plays the ring tone.
1.5.3.Speech Enhancement
You can set the Common Parameters 0~7.
There are 8 Mode for selection :Normal Mode,Headset Mode,LoudSp Mode,BT Earphone
Mode,BT Cordless Mode,AUX1 Mode,AUX2 Mode,AUX3 Mode. The 8 Mode have 0~15
parameter to set.
1.5.4.Max Swing
This setting sets the maximum swing value.
1.5.5.Debug Info
The setting sets the Debug information parameter :0~15.
1.5.6.Auto Record Setting
The Setting includes: VM Support, Auto Speech Record.
You can turn on/off them.
1.6. GPRS Activation
This menu is for GPRS mode test only (if supported).
1.6.1.Attach
To start GPRS attach.
1.6.2.Activate PDP
To activate GPRS PDP context1-15.
1.6.3.Deactivate PDP
To deactivate GPRS PDP context.
1.6.4.Send Data
To send data over GPRS connection.
1.6.5.PING
N/A.
-131-