Table of Contents
Advertisement
Setting
[Area to
erase]
Preset category: [Finishing]
Setting
[Delivery]
Settings values
Settings values
[Area to erase: X
From 0 to 914 mm
origin]
or 0 to 36".
[Area to erase: Y
From 0 to 6000 mm
origin]
or 0 to 250".
[Area to erase:
From 0 to 914 mm
width]
or 0 to 36".
[Area to erase:
From 0 to 6000 mm
length]
or 0 to 250".
Settings values
[Top Delivery Tray]
[Back output] or [Fold].
[Fold template]
Advanced settings for copy jobs
Function
[The horizontal offset where the erase
area starts.]
[The vertical offset where the erase area
starts.]
[The width of the area to erase.]
[The length of the area to erase.]
Function
Location on top of the printer that deposits the
sheet face-down.
NOTE
Not all media types can be delivered
to the [Top Delivery Tray].
Select the [Back output] to deliver your output
face-up, at the back of the printer.
Select the folding device when it is configured,
and you want to fold your output.
When a folding device is configured, you can
select the preferred fold template, to fold with
predefined settings.
Chapter 4 - Use the Printing System
181
Advertisement
Table of Contents
