Contrast Setting; Initial Setting (For Administrator); Language Setting; Date Setting - Fujitsu UTY-RNRYZ1 Operating Manual

3-7-3 Contrast Setting

(1) Touch the [Contrast Setting] on the "Preference" screen.
(2) "Contrast Setting" screen is displayed. Adjust the con-
trast with [ ] or [ ].
(1)
Preference
Panel Backlight
Calibration Setting
Contrast
Back
When the [OK] is touched, after the setting change
screen is displayed, the display returns to the "Prefer-
ence" screen.

3-8 Initial Setting (for administrator)

Perform this setting at installation. The setting can also be
changed after installation.
(1) Touch the [Initial Setting] on the "Main Menu" screen.
(2) When "Password Verification" screen is displayed, enter
the Password (or Installer Password) and touch [OK].
(1)
Main Menu
Summer Time
Preference
Setting
Initial Setting Maintenance
Previous
Monitor
Page
(3) If the password is entered correctly, the "Initial Setting"
screen is displayed. The screen has 3 pages which are
switched by touching the [Next Page] or [Previous Page].
Initial Setting

Language Setting

Date Setting

Temp. Unit R.C.Group
Setting Name Setting
Back
Initial Setting
I.U. Display
RC Master/
Slave Setting Number Setting
Previous
Back
Page
The following contents are set. (♦: for installer)
(*: Items that indoor unit does not support are not dis-
played.)
• Language Setting:
The displayed language is switched. The displayable
languages are English (factory setting), Chinese,
French, German, Spanish, Polish, Russian, Italian,
Greek, Portuguese, Turkish and Dutch.
• Date Setting:
The date and time display format are set. When the
power is turned off, the date and time data hold time
by built-in battery is approximately 7 days. When the
power is turned off for longer than this, the date and
time must be reset.
• Temp. Unit Setting:
The temperature display unit is switched to "°C" or "°F".
Factory settings is "°C".
• R.C.Group Name Setting:
The remote controller group name can be set or
changed.
En-17
(2)
Contrast
5
4
3
2
1
Cancel
(2)
Password Verification
Page 2/ 2
Enter Current Password
0 1
CL
5 6
Cancel
Page 1/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Next
Previous
Back
Page Page
Page 3/ 3
• RC Sensor Setting*:
This setting uses the sensor of this unit to sense the
room temperature. The room temperature can be
sensed at a position, closer to the person than the
indoor unit sensor. Factory settings is "Not Used".
• Master Indoor Unit Setting: ♦
• Password Setting:
The password setting and changes can be performed.
In addition, password request to the following setting
items can be set.
• On Timer (3-3-1)
• Off Timer (3-3-2)
OK
• Auto Off Timer (3-3-3)
• Weekly Timer (3-4)
• Set Temp. Auto Return (3-5-2)
• Set Temp. Range Setting (3-5-3)
• Anti Freeze* (3-5-4)
• Human Sensor Setting* (3-5-5)
• Fan Control for Energy Saving* (3-5-6)
• Initial Setting (3-8)
• Maintenance (3-9)
• Display Item Setting:
Display of the Filter sign and Room temp. can be
switched between Visible and Invisible.
• RC Master/Slave Setting ♦
• I.U. Display Number Setting* ♦
When the item to be set is touched, the display switches
2 3 4
to each setting screen. When each setting is complete
7 8 9
or canceled, the display returns to this screen. When
OK
[Back] is touched, the display returns to the "Main Menu"
screen.
3-8-1 Language Setting
(1) Touch the [Language Setting]
Page 2/ 3
on the "Initial Setting" screen.
Master Indoor
Unit Setting "Language Setting" screen is
displayed.
Display Item
Setting
Next
Page
(2) This screen has 2 pages which are switched by touching
the [Next Page] or [Previous Page]. Touch the language
to be used.
Language Setting
Deutsch
Cancel
(3) When the [OK] is touched, after a setting change screen
is displayed, the display returns to the "Initial Setting"
screen.
3-8-2 Date Setting
(1) Touch the [Date Setting] on
the "Initial Setting" screen.
"Date Setting" screen is dis-
played.
Page 1/ 2
English Français
Język
Español
polski
Next
OK
Page
Initial Setting
Page 1/ 3
Language Setting Date Setting
Temp. Unit R.C.Group
Setting Name Setting
Next
Back
Page
Language Setting
Page 2/ 2
Р Italiano Ελληνικά
Português Türkçe Dutch
Previous
Cancel OK
Page
Initial Setting
Page 1/ 3
Language Setting Date Setting
Temp. Unit R.C.Group
Setting Name Setting
Next
Back
Page