Fan Control For Energy Saving; (For Administrator); Summer Time (Daylight Saving Time) Setting (For Administrator); Preference (For Administrator) - Fujitsu UTY-RNRYZ1 Operating Manual

(5) Touch the [Absence Detection Time] on the "Auto Sav-
ing" screen.
(6) The "Absence Detection Time" screen is displayed. Set
the time with [ ] or [ ]. The time can be set to 15, 30,
45, 60, 90, 120 or 180 min.
(5)
Auto Saving
Enable/Disable
Absence Detection Time [In 30 min.]
Cancel OK
Note
When detection time the same as or longer than "Auto
Off" is set at "Auto Saving", "Auto Saving" does not oper-
ate.
When the [OK] is touched, the display returns to the "Auto
Saving" screen. And when the [OK] on the "Auto Sav-
ing" screen is touched, the display returns to the "Human
Sensor Setting" screen.
Setting of the Auto Off
(7) Touch the [Auto Off] on the "Human Sensor Setting"
screen. "Auto Off" screen is displayed. Touch the [En-
able/Disable] on the "Auto Off" screen.
(8) "Enable/Disable" screen is displayed. Touch the [Enable]
on the "Enable/Disable" screen.
(7)
Auto Off
Enable/Disable
Absence Detection Time
Cancel OK
When the [OK] is touched, the display returns to "Auto
Off" screen.
(9) Touch the [Absence Detection Time] on the "Auto Off"
screen.
(10) The "Absence Detection Time" screen is displayed. Set
the time with [ ] or [ ]. The time can be set from 1 to
24 hr.
(9)
Auto Off
Enable/Disable
Absence Detection Time
Cancel OK
Note
When detection time the same as or shorter than "Auto
Saving" is set at "Auto Off", "Auto Saving" does not oper-
ate.
When the [OK] is touched, the display returns to the "Auto
Off" screen. And when the [OK] on the "Auto Off" screen
is touched, the display returns to the "Human Sensor
Setting" screen.
When the [Back] on the "Human Sensor Setting" is
touched, the display returns to the "Special Setting"
screen.
En-15
(6)
Absence Detection Time
Fri 10:00AM
In
[Disable]
30
min.
Cancel
(8)
Enable/Disable
Fri 10:00AM
Enable
[Disable]
[In 24 hr] Disable
Cancel
(10)
Fri 10:00AM Absence Detection Time
In
[Disable]
24
[In 24 hr]
hr
Cancel

3-5-6 Fan Control for Energy Saving

(for administrator)

(1) Touch the [Fan Control for Energy Saving] on the "Spe-
cial Setting" screen. When the "Password Verification"
screen is displayed, enter the password and touch the
[OK].
(2) "Fan Control for Energy Saving" screen is displayed.
Fri 10:00AM
Touch the [Enable] on the "Fan Control for Energy Sav-
ing" screen.
(1)
OK
Special Setting
Human Sensor
Setting
Back
When the [OK] is touched, the display returns to the
"Special Setting" screen.
3-6 Summer Time (Daylight Saving Time)
Setting (for administrator)
The time display and timer operation are 1 hour earlier than
usual.
(1) Touch the [Summer Time
Setting] on the "Main Menu"
screen.
Enable or Disable the Summer Time Setting
(1) "Summer Time Setting" screen
is displayed. Select the [En-
able] or [Disable] on the "Sum-
OK
mer Time Setting" screen.
When the [OK] is touched, after the setting change
screen is displayed, the display returns to the "Main
Menu" screen.

3-7 Preference (for administrator)

Settings of the Touch Panel Display
(1) Touch the [Preference] on the "Main Menu" screen.
Fri 10:00AM
(2) "Preference" screen is displayed.
(1)
Main Menu
OK
Summer Time
Setting
Initial Setting
Monitor
The following contents are set:
• Panel Calibration:
When the touched position and the corresponding
position does not match on the screen, perform this
setting.
• Backlight Setting:
Backlight enable/disable, brightness, and off time can
be set.
• Contrast:
Adjusts the contrast of the screen.
(2)
Fan Control for Energy Saving
Page 2/ 2
Fan Control for
Energy Saving
Previous
Cancel
Page
Main Menu
Summer Time
Setting
Initial Setting
Monitor
Summer Time Setting
Cancel
(2)
Preference
Page 2/ 2
Panel
Preference
Calibration
Contrast
Maintenance
Previous
Back
Page
Enable
Disable
OK
Page 2/ 2
Preference
Maintenance
Previous
Page
Enable
Disable
OK
Backlight
Setting