Recording/Playing Back With Remote Operations - Panasonic HC-X920 Operating Instructions Manual

Wi-Fi [HC-X920]/[HC-X929]/[HC-X920M]
Recording/playing back with remote
operations
Using a smartphone, you can perform record/playback operations from a remote location or upload
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).


A When connecting to a smartphone
B When connecting to a wireless access point
≥ Before using, perform the preparations for using the Wi-Fi function.
≥ You need to turn on the Wi-Fi function of your smartphone and install "Image App".
(l 132)
≥ Do not remove the SD card during remote operations.
≥ Refer to [Help] in the "Image App" menu for further details on how to operate.
Using with a direct connection
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (l 139).
1
Press Wi-Fi button and touch [Remote Ctrl].
≥ It will go into connection standby for remote operation.
≥ Even if the Wi-Fi button is pressed continuously for approximately 2 seconds while Wi-Fi is not in
use, it will go into connection standby for remote operation.
(This will operate even when the power of this unit is turned off excluding when the power of this
unit is turned off by pressing the power button)
2
Start up the smartphone application "Image App".
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit remote operations:
Touch [EXIT] or press Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
- 143 -
Image App Image App
Image App
(l 129)