4. Configuring the Device
This section provides the information required to set the desired options for the NPE-
180A/240A water heater system with the ComfortAir
4.1 Pump Control Options
CAUTION
The drawings in this instruction are intended only as a guide and are not
replacements for professional engineering drawings. This drawing represents a
concept system and does not imply compliance with local building codes.
Actual installation requirements may vary depending on installation locations
and parameters. All installation work must be carried out in accordance with all
local building codes. Verify with local building officials before commencing
system installation.
The following example demonstrates the application of pump control configuration
options.
+
add-on controller.
Configuring the Device
19